設備規格及功能
1、產品規格：各種規格，可根據客戶要求定制
2、平均產能：平均1000 mm 軟管不低于1200 條 / 小時
3、公差范圍：2000 mm 以下軟管 ± 1 mm
4、額定功率：根據客戶需求選定電機裝機容量
5、尺寸：2200 × 800×850 mm
6、重量：約 280 kg
7、本設備能自動連續切斷各種規格軟管，速度快慢可自由選擇，切斷軟管直徑可自由調節。

標準配置：采用砂輪片切割，氣推油平穩進刀，切割過程中可根據需要隨時調整砂輪片位置；可自行設置需要裁切數量，裁切完成后自動停機；軟管拉住延時自動報警。

Auto-foot in length Pipe Machine
Specifications and functions:
(1)the product specification: all kinds of specifications can be customized according to customer requirements
(2) the average production capacity: an average of 1000 mm hose not less than 1200 / h
(3) tolerance range: 2000 mm below tube ± 1 mm
(4) rated power: According to customer demand for selected motor capacity
(5) Size: 2200 × 800 × 850 mm
(6) weight: about 280 kg
(7) the device can automatically cut off a row of various size hoses, speed speed can freely choose to cut off the hose diameter and are free to adjust.

Standard configuration: Using film cutting wheel, gas and oil pushed steadily into the knife, cutting process can be adjusted according to need wheel-chip location; can set our own need to cut the number of automatic shut down after cutting; hose pulled automatic alarm delay .